User`s manual

Basic Setting > Audio (Sound)

Basic Setting > Audio > Audio (sound setting)

 Basic Setting > Audio > Audio > Audio Raw Format

You can select No Audio or PCM. When you select No Audio, the sound

transmission from the microphone pauses. When you select PCM, the sound

transmission resumes. The factory default is PCM.

Basic Setting > PTZ

Basic Setting > PTZ > PTZ

 Basic Setting > PTZ > PTZ > PTZ camera Port Setting

This product supports the PTZ control of those analog PTZ cameras use the

drivers of Pelco-D, Pelco-P and A-Linking. Refer to the user manual of your

PTZ cameras, and you will know which driver to select. Moreover, select the

serial number (address) of the targeted PTZ camera for controlled setting.

(Note: RS-485 can cascade numbers of cameras that use same driver. You can

control the pan, tilt and zoom of your targeted camera by connecting to the video

server control panel through RS-485).

Sound transmission format