User`s manual

20
4. Tour: enables/disables the tour mode of the camera.
The rotation points of the camera must be set up in advance.
5. AutoPan: enables/disables AutoPan.
You can enable the AutoPan function to make the camera automatically move
back and forth horizontally. Disable the AutoPan function to stop the scan.
1. Click Set to enter the Tour Setting screen.
2.
N
ame the tour. You can se
t
up 5 tour groups at
maximum.
3. Dwelling time (sec.) at each tour point.
4. Select a preset location for the
camera.
5. Click Update to Exit.
6. Click Enable to activate the tour function.