User`s manual

Camera Setting from a Router

You can use DHCP when you want to use the video server on the Intranet (LAN).

However, the IP must fixed when you want to use the product on a WAN. For this

application, it is required to set up a virtual server on the ADSL router. Follow the

steps below to complete the setting:

1. Enter the product setting page to set a fixed IP. (Refer to the “Network Setting”.)

Ex.: 192.168.0.49

2. Enter the ADSL router main setting page. Ex.: Zonet ADSL router

3. Enter the Virtual Server setting page.

a. Set “mapping of HTTP Port (80) to 192.168.0.49 ”.

b. Restart ADSL router.

After completing the settings, you can operate the product from a WAN IP Address

via the ADSL router.

The Virtual Server setting screen of the Zonet ADSL router

Note: The virtual server setting screen is not the same for all ADSL routers. Refer to the manual of the

ADSL router you purchased for more information about the setting.