User`s manual

Notes:

1. The IP FINDER can only find the IP addresses of a video server that shares the same hub on the

LAN. For information about finding IP addresses on the Internet, refer to the “DDNS Setting”, or

“UpnP Setting”.

2. All UIC camera/network server products can be found and changed using the IP FINDER

software.

3. If the IP FINDER software cannot be executed, check your antivirus software or firewall to

remove the block.

4. Field description: You can give a name to your camera (such as “PT_IP” or “PT-IP”). No spaces

allowed (such as “PI IP”).

You can change the settings for IP, Gateway Address and Network Mask to meet the requirements

of your network environment. The product uses HTTP Port1 and does not support Port2 settings.

MAC: Factory default network identity of the machine.

4. When all changes

have been confirmed,

click Exit to

uit.