User`s manual

11
Camera Settings
After the hardware has been installed, insert the supplied CD in the computer and
execute the file IP FINDER.EX following the steps below to search for and change
the IP address of the video server.
1. Start the machine.
Execute the IP Finder.exe from the supplied CD.
2. Find the camera (Search)
Search the product from your LAN. The factory IP setting 192.168.0.20 appears
on the screen.
3. Changing the IP address and related settings for the network environment
When you find the camera, click it and the settings will appear on the right side.
Change the settings for the new network environment you need.
※ You must enter new settings in the IP, Netmask and Gateway fields and keep
the settings in other fields unchanged.
4. Submit data (Submit)
Click Submit to validate new settings.
5. Confirmation
When all changes have been confirmed, click Exit to quit.
1. Click Search to
find the Video
Server on the LAN.
3. Click Submit to
validate new settings.
2. Enter the settings for the
new network environmen
t
you need.