User`s manual

Basic Setting > Date/Time (date/time setting)

Date/Time setting

 Basic Setting > Date/Time > Server Time (the date/time of the server)

 Basic Setting > Date/Time > PC Time (the date/time of your PC)

 Basic Setting > Date/Time > Time Setting (date/time setting)

There are three ways to synchronize the time.

1. Synchronize the time with PC’s time:

The preset method of time synchronization of the camera time with your PC

time.

2. Get Time from an NTP server: synchronize the time with the NTP

(Network Time Protocol)

z Click on the “NTP” Button

z Enter the NTP server’s IP address.

z Press “SAVE” to activate it.

The camera will update its time once obtaining the NTP time.

Note: The default NTP servers are:

A. NTP Server 1: 198.123.30.132

B. NTP Server 2: 192.43.244.18

C. NTP Server 3: 133.100.9.2

3. Change the time manually:

z Click the “User Input”.

z Select the format of date display, i.e. “yyyy/mm/dd” format.

z Select the format of date display, “hh:mm:ss” by 24 hours format.

z Select the time zone.

z Select “Adjust” to adjust time.