User`s manual

Encryption mode

Encryption authentication type

Encryption group

WEP security mode: Select an encryption mode from the list. The format is “None”

by default, indicating that the security function is disabled.

Authentication mode: One of the following authentication modes is required when

you select a WEP encryption mode from the security list.

1. 64 Bit (10 Hex chars)

2. 64 Bit (5 ASCII chars)

3. 128 Bit (26 Hex chars)

4. 128 Bit (26 ASCII chars)

WEP key password encryption mode:

You can set up 64 Bit or 128 Bit WEP key password encryption mode. A set of 64 Bit

encryptions is equivalent to 10 sets of hexadecimal digits or 5 sets of ASCII

characters. A set of 128 Bit encryptions is equivalent to 26 sets of hexadecimal digits

or 13 sets of ASCII characters.

Encoding HEX ASCII

Available characters 0~9, a~f, A~F 0~9, a~f, A~Z

64 Bit 10 5

128 Bit 26 13

Ex.: Wireless mode setting (applicable to most situations)

Selection:

1. Mode: Select Infrastructure to connect the camera to a wireless base station.

2. Authentication Type: Select Shared Key.