User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
I can't control the camera
to move up, down, right, or
left smoothly.
Delay might occur when you are accessing a video stream and
remotely moving the camera horizontally. Where significant delay
is identified when you move the camera horizontally or vertically
deactivate the audio streams and/or reduce the size of the video
stream...
Camera Image Quality
Camera has a problem
focusing.
• The lens might be contaminated with dust, fingerprints, or other
dirt. Use a special cleaning cloth to clean the lens or adjust the
focus manually.
• Focusing might be impossible in some cases. If the object is too
close to the lens, more it away from your camera.
Color of the video stream
is too deep or light.
• Please confirm that the image you are watching has the best
quality. Adjust the setting of your display card (color quality) to
at least 16 bits (24 bits or more are recommended).
• Incorrect camera video setting. You may need to adjust some
parameters, such as brightness, contrast, color, and saturation.
Video stream flashes. • Incorrect power cord frequency may cause flashing of the image.
Confirm that your camera uses NTSC or PAL system.
• The image flashes if the objects are black. In this case, adjust the
illumination brighter around your camera.
This is noise problem
during transmission of the
image.
Noise may be produced if you install your camera at a very dark
place. Adjust the illumination around your camera.
Others
How to reboot my camera? If you only need to re-boot the system and don't want to change any
setting, enter the Setting page and select the Reboot option at the
bottom of the screen. The system will reboot automatically.
I can't replay recorded
files.
Confirm that you have installed Microsoft
®
’s DirectX 9.0 or above
and use Windows Media Player 9 or above.
92