User manual
Table Of Contents
- Contents
 -  Package Contents 
- Camera Unit Pack
 - Accessory Pack
 - Introduction
 - Features and advantages
 - System Introduction
 - Hardware Installation
 - Camera Setting from a Router
 - Enter the Main Page
 - Camera Main Page
 - Basic Settings 
- Basic Setting > System (System info)
 - Basic Setting >Video/Image
 - Basic Setting > Audio (Sound)
 - Basic Setting > User(User)
 - Basic Setting > Network (Network Settings) 
- Basic Setting > Network > Network (cable network setting page)
 - Basic Setting > Network > Streaming (streaming Setting)
 - Basic Setting > Network > PPPoE (dial-up networking setting)
 - Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
 - Basic Setting > Network > UPnP (Universal Plug and Play)
 - Basic Setting > Network > SMTP Server (mail server setting)
 - Basic Setting > Network > Samba
 - Basic Setting >\ Network >\ Multicast
 
 - Basic Setting > Date/Time (date/time setting)
 - Basic Setting > IP Filter
 - Application Setting > Event (event trigger setting page)
 - Application Setting > Firmware upgrade
 - Application Setting > Factory Default
 - Application Setting > Reboot
 
 - Attachment A: External Alarm
 - Attachment C: Troubleshooting and FAQs
 - FCC Class B Announcement
 
 

Application Setting > Factory Default 
You can use this function to reset to factory default, but all changes, including the IP 
address, you have made are deleted. 
Back to the default setting 
Factory Default: Reset to factory 
default .
Warning window 
Resets all parameters, except the IP parameters: 
You can use this function to reset to factory default. All changes you have made are 
deleted but the IP address and all settings relevant to networking remain valid, 
including cable and wireless network settings. Click Set to complete the reset. 
Resets all parameters: 
You can use this function to reset to factory default. All changes, including the IP 
address, you have made are deleted. Click Set and a warning window appears to ask if 
you really want to reset to factory default. Click “OK” to complete the reset. 
83 










