User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
Motion detection
Setting area
Application Setting > Privacy mask
The privacy zone function can mask the image in the mask zone to ensure
confidentiality. First, select a mask zone (A to X) and a mask color (Color 0 or Color
1) in the privacy zone. Then, move the green frame to the area you want to mask.
Moving the cursor to the bottom right corner of the frame can change the size of the
frame. When the setting is completed, click Save to make the setting effective, and the
screen will automatically refresh within a few seconds after the setting is effective.
Note: No more than 8 privacy zones can be displayed on the screen. If more than 8
zones are set, they are displayed according to the priority (A is the highest, and X is
the lowest). When the setting is completed, the computer reads the new setting and it
takes about one minute to return to the live image screen. Please be patient.
78