User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
加入 TCP 設定頁面
Name: TCP server name
Network Address: TCP IP address
Port: TCP port
Modify: Modifies the setting value
Remove: Removes the setting value
Application Setting > Motion Detection
You can open the setting frame by clicking on the area to monitor. To move area to
monitor, drag the area with your mouse; to adjust the size of the frame, drag the arrow
to adjust after you move the mouse to the edge of the area and left-click; There are 3
frames available for setting. You may adjust the sensitivity of the area by entering the
degree of sensitivity in the “Sensitive” field. “1” is least sensitive, ”100” is extremely
sensitive.
Select Save to complete and activate your settings.
.
77