User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
out: DI terminal behind the machine, such as high-decibel alarms, light
projectors. You can set the alarm duration in the “Duration” field.
Upload video
to :
The camera will sent the capture Motion JPEG or MPEG4 video of
the event to the FTP server or Samba you specified.
Include pre-trigger buffer:When an event is detected,the camera will
record the previous video image up to 10 seconds.
Include post-trigger buffer:When an event is detected,the camera
will record the post video image up to 10 seconds.
Continue video upload: When the event is continue, the camera will
record the viddeo image up to 10 seconds.
For example: If the pre-trigger 5 seconds, post-trigger 5 seconds and
continue video upload 5 seconds have been selected, the total file
size will be 15 seconds.
Upload img
to :
The camera will sent the capture photo of the event to the FTP
server or Samba you specified.
Send HTTP
notification:
The alarm will be sent to the HTTP server you specified. To use this
function, set the coordinative HTTP server in the Event Server
setting page in advance.
Send TCP
notification:
The alarm will be sent to the TCP Server you specified. To use this
function, set the coordinative TCP server in the Event Server setting
page in advance.
Go to Preset
Location
Force the camera turn to the preset location when the trigger is
detected.
Day Night Force the camera turn into Day/Night Mode when the trigger is
detected.
Click Save to save and activate your settings when you completed setting.
72