User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
Notification of IP change
Basic Setting >\ Network >\ Multicast
This function allows multiple people to watch video streaming without limitation on
the number of users, but is only applicable in the LAN environment. The video
streaming format (MPEG4/MJPEG) depends on the selected image format setting in
Basic Setting → Video/Image → Video Format.
Basic Setting >Network >Multicast>MPEG4
This function allows multiple users to view the MPEG4 video stream free from
restrictions on the number of users. However, this is only effective within the LAN.
Basic Setting >Network >Multicast>Motion JPEG
This function allows multiple users to view the Motion JPEG video stream free from
restrictions on the number of users. However, this is only effective within the LAN.
65