User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
User setting
Change the privilege or password of
Ythth
Add a new user and set up a
different
p
rivile
g
e.
Delete a user from the list.
Log in the username, password and
privilege as required. You can also
define the PTZ control here.
Basic Setting > User > User Setting (privilege setting)
For special business situations, this product allows you to log in to browse without the
need of keying in your username and password. For this purpose, you need to check
“Enable” at Anonymous Login. To allow the user to control the camera, you need to
check “Enable” at Anonymous PTZ Control. However, “Disable” for both options is
recommended for the sake of security. Depending on the bandwidth and requirements,
a limit up to 10 viewers who are allowed to view the camera simultaneously can be
defined.
Note: The initial login name and password of this product is “root”. This “root” user
name cannot be deleted but the password can be changed. For security purposes, we
recommend that you change and remember the password after the first login. If you
forget the new password, the only way is to use the hardware Reset key to restore the
Factory Default.
55