User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
Exposure mode setting
Basic Setting > Audio (Sound)
Basic Setting > Audio > Audio (sound setting)
Basic Setting > Audio > Audio > Mode
Audio mode: Full duplex, half duplex, simplex microphone only, simplex
amplifier only, and audio off.
Full duplex: Allows using a microphone and amplifier at the same time, or
turning them off.
Half duplex: Allows using a microphone or amplifier by manual switch.
Simplex microphone only: Allows using the microphone only.
Simplex amplifier only: Allows using the speaker only.
Audio off: Turns audio off; i.e. both the microphone and speaker are off.
Sound transmission format
Audio input: 4 formats
Audio output: 4 formats
G726/24: Uses G.726 24Kbps for audio encryption/decryption.
Gain: Adjust the volume of the audio.
53