User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
12. Alert: Notification of alarm
If the camera detects a movement or an alarm, the Alert button will flash to alert
the monitoring personnel. Click the Alert button to stop the flashing.
Alarm notification
Alert message display is activated.
Alert message display area.
Enable to save alert messages.
13. Alert Message:
Alert Message: The Enable/Disable button can activate or stop the display of the
alert message. When Disable is selected, no message will show.
Save AlertImg: The Enable/Disable button can activate or stop the save of the alert
image in the Snapshot directory. When the button shows Enable,
you have to click it to activate the save function. When the Save
AlertImg shows Enable, double clicking an alert message in the
message list will display the image of that alert message. When an
alarm is triggered, an alert message will display (up to 50
messages). The displayed message will be cleared when your quit
the window. (For details of alarm settings, refer to Setting/
Application Setting/ Event/Event.)
38