User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
8. Tour: This function can enable or disable the auto tour mode for the selected
location.
This function can only be enabled after the preset location is selected.
You can define up to 5 groups of tour settings.
1. Click Set to enter the tour setting window.
6. Click On to activate the auto tour mode.
2. Enter a name for the tour setting. Up to 5
groups of tour settings can be defined.
3. Time (second) to stop at each tour
location.
4. Select a preset location.
5. Click Update and then Exit.
Auto horizontal tour mode.
9. AutoPan: You can use this function to enable or disable the automatic horizontal
tour mode.
In the AutoPan mode, the camera automatically rotates counterclockwise and keeps
horizontally rotating till disabled.
10. Park to: You can use this function to select a preset location to which the camera
will return when the PTZ function is not operated any more.
11. After minutes: You can use this function to define the time interval at which the
camera will return to the preset location when the PTZ function is not operated any
more.
37