User manual
Table Of Contents
- Contents
- Package Contents
- Camera Unit Pack
- Accessory Pack
- Introduction
- Features and advantages
- System Introduction
- Hardware Installation
- Camera Setting from a Router
- Enter the Main Page
- Camera Main Page
- Basic Settings
- Basic Setting > System (System info)
- Basic Setting >Video/Image
- Basic Setting > Audio (Sound)
- Basic Setting > User(User)
- Basic Setting > Network (Network Settings)
- Basic Setting > Network > Network (cable network setting page)
- Basic Setting > Network > Streaming (streaming Setting)
- Basic Setting > Network > PPPoE (dial-up networking setting)
- Basic Setting > Network > DDNS (Dynamic Domain Name Server Setting)
- Basic Setting > Network > UPnP (Universal Plug and Play)
- Basic Setting > Network > SMTP Server (mail server setting)
- Basic Setting > Network > Samba
- Basic Setting >\ Network >\ Multicast
- Basic Setting > Date/Time (date/time setting)
- Basic Setting > IP Filter
- Application Setting > Event (event trigger setting page)
- Application Setting > Firmware upgrade
- Application Setting > Factory Default
- Application Setting > Reboot
- Attachment A: External Alarm
- Attachment C: Troubleshooting and FAQs
- FCC Class B Announcement
Hardware Installation
Important Safety Precautions
1. Please carefully read the instructions before installation.
2. Keep the manual for future use.
3. Pay attention to all warnings on the equipment and in the manual.
4. Follow all instructions and operation procedures.
5. Turn off the power before wiping the camera. Liquid or cleaner spray is not
allowed.
6. Must use the recommended accessories to avoid failure.
7. Use the power supply and voltage as recommended in the manual.
8. Avoid the intrusion of foreign matters into the equipment to avoid failure.
9. Do not install the camera on an insecure holder, wall or ceiling to avoid damage to
personnel and equipment.
10. Do not open the protective cover to avoid electric shock or other hazards.
11. Do not attempt repairs by yourself. Otherwise, electric shock might occur or the
warranty may become invalid. Please contact us if there is any problem with the
product.
12. Only replace with approved parts. Unapproved replacements may bring about
damage to the equipment.
13. Only use this camera indoors. Exposure to the rain or humidity may damage the
equipment.
14. Protect the camera from falling or shock.
15. Do not touch the lens when the camera is operating. Otherwise, the equipment
might fail.
16. Do not install the camera in an environment with extreme temperatures.
17. Do not install the camera at the place where flammable or corrosive gas exists.
10