User's Manual

ALXC2X USER MANUAL
Alinket Proprietary & Confidential Information
E-mail: [e-mail] Website: http://www.alinket.com
20
Figure 20 Create the UDP Connection
3. Click “OK” to create UDP in PC side, then it would connect to the module automatically.
4. If connection is ok, module and PC can send message to each other.
3.5 BT Tool Configuration
Table 5 BT Information Available From ACM
ID
Name
Description
1
Power Up Indication
Reports the power up reason
2
Software Reset
Let the module reset itself
3
Get System Information
Includes manufacture, product name, SN, hardware
version, boot loader version, firmware version,
Bluetooth firmware version and produce date
4
Get UART Baud Rate
Show the UART baud rate
5
Set UART Baud Rate
After receiving the response restart the ASCS
6
BT On
Initialize its stack
7
BT Off
Shut down the BT function
8
Get BT Address
Return the MAC address
9
BT Send Data
Send message to specific MAC address
10
BT Receive Indication Data
Receive message from connected device