User's Manual

ALXC2X USER MANUAL
Alinket Proprietary & Confidential Information
E-mail: [e-mail] Website: http://www.alinket.com
17
Figure 13 Configuration about Join AP
4. “IP Configuration”, choice “DHCP Status” enable, “set” into module. Then click “Get” can get IP
address
5. Choice “Create TCP Client Socket”, default value is ok, except “Port Number”, this number
should be same with TCP&UDP test tool.
Figure 14 Create TCP Client Socket
6. Open “Alinket Socket Runner”. Create server and fill in the port number. Shown as Figure 15.
Figure 15 TCP/UDP Tool (Server)