Specifications

AL-100 Operations Manual Version 1.0

Rear Panel

The rear panel of the AL-100 features four connectors:

• Ant connector: Connect the 50-ohm coax antenna feedline to this standard

SO-239 connector.

• GND connector (wing nut): Connect to earth ground.

• TX connector: Connect a 50-ohm coax jumper cable from this standard SO-

239 connector to the antenna jack on the back of your transceiver.

• Radio connector: Use the supplied cable to connect to your radio’s Tuner

jack.

The

rear

panel

has

standard SO-239

sockets for input

and output, a 4-pin

DIN socket for radio

connection, and a

ground post.