Instruction Manual

21
(22)
Tx Interrupt
This feature allows the supervisor to start the transmission while
another person is talking. It allows supervisor to override the ongoing
transmission brings other radios hear what the supervisor is saying,
the radio that is transmitting at the time of this override will not hear the
supervisor until he release keys his radio and then he will be able to hear
the rest of the conversation.
※
Chan Set (Avaiable in Analog Channel only)
When the channel type is analog, it will automatically hide the digital
menu, The below listed menus are for analog channel only, unlisted
menus are are the same as the digital channel, please refer to Chan Set
(Digital Channel).
(4)
TCDT
Set up the CTCSS/DCS code for the TX.
(5)
RCDT
Set up the CTCSS/DCS code for the RX.
(6)
RTCDT
Set up the CTCSS/DCS code for both TX and RX CTCSS code:
62.5Hz~254.1Hz, a total of 51 groups DCS code: 000N~7771, a total of
1024 groups.
(7)
Optional Signal
Allows the setup of DTMF/5TONE/2TONE encode and decode for the
Analog channels.
(10)
Squelch mode
When the analog channel is set up for both CTCSS/DCS decoding and
optional signaling, you can set up the RX condition in this menu.
SQ: You can hear the call once the channel receive matched carrier.
CDT: You can hear the call when receive matched CTCSS/DCS signal.
TONE: You can hear the call when receives a matched signaling.
C&T: You can hear the call when receives a matched CTCSS/DCS and
matched signaling.
C|T: You can hear the call when receives a matched CTCSS/DCS or.
(11)
Band Width
Choose wide band or narrow band for the analog channel.
(12)
Reverse
When this function is enabled, the RX frequency, TX frequency and
CTCSS/DCS encode/decode will be reversed.
(13)
Compander
Enable this function to reduce background noise and enhance audio
clarity, especially in long range communication.
(14)
Scrambler
An analog voice inversion scrambler can be equipped.This special audio
process can offer a more condential communication.
Other radios at same frequency will receive only disordered noises.
The radio has 11groups standard Scrambler and 1 group self-defind
Scrambler. It works with the CML128 and CML138.
(19)
Busy Lock
Always: Always allows transmissions
RL: Will not allow transmit when receiving matched carrier but
unmatched CTCSS/DCS.
BU: Will not allow transmit when receiving matched carrier.
(21)
OWN ID
When the analog channel set up with optional signal, you can check the
radio ID number in this menu. The ID number should be set up in PC
software – Analog – Analog Address Book.
(22)
DTMF Enc
Set a DTMF ID as the default call ID for the current channel.
Press the PTT key to transmit the selected DTMF ID.
Edit the DTMF ID in Menu or with the PC programing software.
7
MAIN MENU FUNCTIONS