Instruction Manual

18
The password shall be set up in CPS-Optional Setting-Power on-Power-
on Password Char.
(34-35)
AuRepeater A or B (For VFO A or B)
Turn on the Auto Repeater function, the TX frequency in VFO mode will
auto increase or reduce frequency base on the set up offset frequency in
CPS.
Off: Turn off the function.
Positive: TX frequency= RX frequency + Offset frequency.
Negative: TX frequency= RX frequency - Offset frequency.
(36-57)
Key P1-P6,PA-PD
You can program these keys for different functions.(Refer to page 8-9)
(58)
Weather Alarm
Turn on or off the weather alarm function
.
(59)
Weather Channel
When the Weather Alarm is on, the weather channel will work as sub
channel. Once the weather alarm is received, the radio speaker will
open and start the alarm.
(60)
Repeater (Cross-band)
Turning on the cross-band repeater function will allow the radio to work
as a small local repeater. The radio will TX on one channel, RX on the
other channel.
Note: Cross-band Analog-Analog: Must be UHF-VHF, or VHF-UHF cross
bands.
Cross-band Analog- Digital: Must be UHF-VHF, or VHF-UHF cross
bands.
Cross-band Digital- Digital: UHF-VHF, or VHF-UHF cross bands,
different times lot.
Cross-band Digital- Digital: Same UHF or same VHF bands,
different times lot.
Cross-band Same frequency Digital-Digital: TX and RX are at
same frequencies, but different times lots on VFO A and VFO B.
Radio must also be in Double Slot operation.
** Please Turn Off Digital Monitor when using the Cross-band repeat
function**
Analog (A) to Analog (A) Cross band Repeater Setup
a. To set the channels or frequencies you will want to use with cross
band operation, the radio must be set to display both the Main
Channel (VFO A) and the Sub-Channel (VFO B).
b. Set the analog channel with simplex or repeater frequency.
c. Turning the Repeater function ON in the Radio Settings menu.
Analog (A) to Digital (D) or Digital (D) to Analog (A) Cross band Repeater
Setup
a. To set the channels or frequencies you will want to use with cross
band operation, the radio must be set to display both the Main
Channel (VFO A) and the Sub-Channel (VFO B).
b. Set the analog channel with simplex or repeater frequency, and set the
digital channel with simplex frequency only.
c. Turning the Repeater function ON in the Radio Settings menu.
Digital (D) to Digital (D) Cross band Repeater Setup
a. To set the channels or frequencies you will want to use with (D) to (D)
cross band operation, the radio must be set to display both the Main
Channel (VFO A) and the Sub-Channel (VFO B).
b. Enter the Simplex channel or Simplex frequency for VFO A and the
Simplex channel or frequency for (VFO B).
c. Set the correct Color Code and set the two (VFO) channels to
DIFFERENT Time Slots (TS)
d. Set the radio to Double Slot operation.
e. Turning the Repeater function ON in the Radio Settings menu.
**Allows the VFO A and VFO B at same frequency but different time slot,
the radio will work as a digital single frequency repeater.
(61)
SMS Format
7
MAIN MENU FUNCTIONS