Instruction Manual

6
3
NO. KEY FUNCTION
1
Power Key
Press to power On. Press and hold for 2 seconds to
turn Off the transceiver.
2
VOL A knob
VOL B knob
Adjust audio level of channel A.
Adjust audio level of channel B.
3
CH knob
( channel
selector)
Rotate to choose a frequency/channel. In scan
mode, rotate to change scan directions.
Press: To use the pre-programmed function.
Press and hold: To use the pre-programmed
function.
4
MENU key
Press to enter function menu set up.
Press to select/conrm a selection.
Press and hold[MENU] key until the LCD display
"Next Please Press Dial Key", press the number key,
it will perform the programmed function.
Combination key function shall be setup in PC
software-Public-Hot key.
Getting Acquainted
Front panel
Basic Functions
5
EXIT key
Press : Press to return to previous menus.
Press to delete characters when texting message.
Press and hold to active keypad lock.
6
P1-P6 key
Press/ press and hold these keys to use the pre-
programmed functions.
In the radio menu setting, P1 is up key and P2 is down key.
7
MIC connector Connector to connect the speaker mic.
8
LED indicator
Constant Red : Transmitting
Constant Green : Analog Receiving
Constant Cyan : Digital Receiving
Flashing Green : Scan
Constant Orange : Repeater function.
9
LCD Display
Displays frequencies, channels and other operating
parameters.
NO. KEY FUNCTION
1
Ext. Dual Speakers To connect external stereo speaker.
2
Ext.Single Speaker To connect external mono speaker.
3
Antenna Connector Connect a 50Ω antenna.
4
Fan Set fan control in PC software and by manual setting.
5
GPS Connector To connect GPS scanner.
Rear panel
4
8 9
5
7
3
4
3
1
2
6
Features, channels of operation and functions may be blocked by the
dealer programming.
5