Instruction Manual

9
TURNING ON THE POWER
SPARES
TURNING OFF THE POWER
ADJUSTING THE AUDIO OUTPUT (VOLUME)
RECIEVING
TRANSMITTING
Turn on the transceiver by pressing the power key, and the LCD displays
"Booting, please wait". Then it will show a start-up message, and you will
hear a beep after 7 seconds.
Mounting brackets, hardware, DC cable etc are also available as spare
parts from your dealer.
EMS- 88 Speaker Microphone
ERW-21 PC interface cable
Turn off the transceiver by pressing and hold the power key for 2
seconds, and the LCD light is turned off.
Turn the VOL A or B knob clockwise to increase the audio level, counter-
clockwise to decrease audio level of channel A or channel B.
When a signal is received on the channel that you selected, then the
received signal can be heard.
The indicator lights green while transceiver is receiving in analog
channel or lights cyan if it is receiving in digital channel.
1. Press the PTT key. The red TX indicator turns on while transmitting.
2. While holding down the PTT key, speak into the unit at normal voice
from the distance of 5cm.
3. Release the PTT key to receive.
5 6
Basic Operations Options