Instruction Manual

22
7
FUNCTION MENU SETUP
RESTORE
If your radio seems to be malfunctioning, resetting the microprocessor
may solve the problem. When performing the reset, you may lose
memory data and stored information. Use PC software to save the
memory and setting data whenever you edit setting for this reset
purposes.
1.
Press and hold
FUNC
key for over 2
seconds to enter general setting menu.
2.
Press
P3
/
P4
key to choose No.26
menu, LCD displays "
RESTORE
".
3.
Press / to select the
desired operation.
FACT:Resume factory default for
channel, signaling and general setting.
SETUP:Return initial setup for No.16-No.24 general setting menu.
4.
Press any key except
PWR
,
P3
,
P4
, , key to exit.
4.
After finishing edition, press to confirm and enter into edition of
current group's ID corresponding name.Press / to
select desired letter, press
P3
to move cursor to next edition,
press
to clear out all letters. 00-127, total 128 group ID and
corresponding ID name.
5.
Press
P2
to confirm and return into main menu. Repeat above
Step 3 and Step 4 operations to edit multi-ID and corresponding ID
name.
6.
Press
FUNC
key to return to standby status.