Instruction manual

Basic Operations

Programmable data in the memory channel

Each Memory channel including 00 – 99, 100 – 39, CALL channel and AL, AH, PL, PH channel

can store following:

• Frequency

• Shift frequency

• Shift direction (+ / -)

• Tone encoder frequency

• Tone decoder frequency

• Tone encoder/decoder setting

• DCS encoder code

• DCS decoder code

• DCS setting

• Skip CH setting

• Busy channel Lock Out (BCLO)

• Digital mode setting

• Digital code

• Narrow mode setting

• AM mode setting

• Clock shift setting

Memory channel deleting

1. Select the memory mode by pressing the V/M

key.

2. Select the desired memory channel number by

rotating the main dial.

3. The programmed memory channel has the

memory number illuminated on the display.

4. By pressing the M/W key together with the

FUNC key while [F] icon is on, a beep will

sound and the memory will be deleted. At the

same time, [Memory No.] icon will start flash-

ing.

NOTE: When an LCD memory channel is flashing, the full contents of the memory are

displayed in the LCD.

After pressing FUNC key again, if you press M/W key while [F] icon is on, you can

restore a deleted memory. However, after changing CH or the mode, restoration

will not be possible.

Memory Mode