User Guide

3.Names and Operations of Parts
3
20
Side
⑬
⑨
⑩
⑪
⑫
⑨
⑩
⑪
⑫
⑬
SMA Antenna
Connector
FUNC key
PTT key
MONI key
DC-IN jack
Attach the whip antenna. If you plan to use an optional antenna,
select one that is tuned to the operating frequency.
The FUNC key is used in combination with the other keys to
access the various functions of the unit. To enter the Set mode
to set operating parameters, press the FUNC key continuously
for about 2 seconds.
Press the PTT key to transmit, release to receive.
When the MONI key is pressed, the squelch unmutes regardless
of the TSQ/DCS setting. Pressing the MONI key after pressing
the FUNC key illuminates display for about 5 seconds. Pressing
the MONI key while pressing the PTT key transmits a tone-burst
signal.
Connect an external power source of DC 7.0V~DC 16.0V at 2A
or more. An optional EDC-36 cigar-cable is available for mobile
operation. EBP-65/66 packs can be charged using this jack
(page 16).
Antenna side Dial side
■