Instruction manual

8.Set Mode

8.3.19 Menu 19 Battery Type Setting

Select the correct battery type from Ni-MH battery pack, Li-ion battery pack and

Alkaline (and Oxyride) dry cells in order to display the battery-level icon correctly

and to perform the battery-charge using the DC-jack.

1. BAT-NI is displayed on the LCD.

2. Rotate the dial to select battery type from Ni-MH battery pack (BAT-NI), Li-ion

battery pack (BAT-LI) and Alkaline dry cells (BAT-AL).

• Cut out the Set Mode Function List below for use as a quick reference.

1. BS-ON Battery Save

2. TIMER Timer/Busy scan setting

3. BEP-ON Beep sound

4. 1750 Tone-Burst Frequency setting

5. SFT-OF CPU Clock Frequency shift

6. BCL-OF Busy Channle Lock Out

7. T-OFF TOT (Time-Out-Timer)

8. TP-OFF TOT Penalty

9. STP-5 Tuning Step

10. SFD-OF Shift Direction

11. 0.600 (7.600) Offset Frequency

12. TN-OFF Tone Squelch

13. 88.5 Tone Frequency

14. DCS-OF DCS

15. APO-OF APO (Auto-Power-Off)

16. SKP-OF Skip Channel

17. ATT-OF ATT (Attenuator)

18. CHG-ON Battery Charge

19. BAT-NI Battery type

Reference (Set mode)

NOTE:

Please set this parameter correctly. When the BAT-LI or BAT-AL is selected,

previously explained battery charge function can't be performed.

BAT-NI

(Ni-MH)

BAT-LI

(Li-ion)

BAT-AL

(Dry cell)