Instruction manual

7.Special Functions

1. In the VFO/Memory/Call channel mode, select the channel to which you wish to

apply the Repeater-Access setting.

2. Press the FUNC key, and while is displayed on the LCD, press the key.

The Repeater-Access setting is applied to the operating frequency.

NOTE:

Preset parameters on the Repeater-Access function memory will be effective at

any frequency. Repeater-Access parameters have priorities over the parameters

programmed in the VFO/memory/CALL modes.

Repeater-Access

7.3

Caution

• The time to refresh totally depends on the remaining charge of the battery

pack. To discharge the fully-charged EBP-65 may take up to approx. 7 hours.

• When this function is on, the backlight and the keys are illuminated, and

noise from the speaker can be heard.

• Before storing the rechargeable battery pack for an extended period of

time, please full-charge it after this operation. Also, refresh and fully charge

the battery once every 6 months to keep the pack in good condition.