Instruction manual

8.Set Mode
8
52
8.3.18 Menu18 Mid power
RF output of the mid power can be customized.
Variable range is from 1 to 3W approximately.
Default setting: About 2W (05)
1. MID-05 is displayed on the LCD.
2. Rotate the dial to select the power level.
3. Press PTT to transmit.You can still very the setting in this state. Press any key other
than PTT or FUNC to complete the setting and return to the operating mode.
• Cut out the Set Mode Function List below for use as a quick reference.
Reference (Set mode)
BS-1 Battery save TIMER1 Scan setting BEP-ON Beep sound VOD-OF VOX delay time setting APO-OF Auto power off NORMAL FM/NFM setting ATT-OF Attenuator setting SFT-OF CPU clock frequency shift BCL-OF Busy channel lock out 1750 Tone burst frequency T-OFF Time out timer setting TP-OFF TOT penalty setting DWT-01 DTMF wait time setting DF-60
DTMF first digit burst time setting
DB-60 DTMF burst time setting DP-60 DTMF pause time setting STB-OF Stand by beep MID-05 MID power setting
NOTE:
The transmission power may vary depending on the condition of the battery
pack.
00 01 --- 04 05 06 --- 09 10
About 2W
Higher outputLower output