Instruction manual

78
2 Call up the MOVE CH screen.
Point the arrow at +MOVE CH using the dial or UP/DOWN key, and then press
the key.
3 Select the bank that includes the memory channel you want to move.
Select the bank number using the dial or a numeric key
(Pressing the key toggles from bank groups A
through E). Move the arrow to the position pointing at the
channel by pressing the DOWN key.
4 Select the memory channel you want to move.
Using the dial or a numeric key, select the channel
number you want to move. Press the key.
5 Select the bank that includes the destination memory channel.
Select the bank number using the dial or a numeric key
(Pressing the key toggles from bank groups A
through E). Move the arrow to the position pointing at the
channel by pressing the DOWN key.
6 Select the destination memory channel.
Select the destination channel number using the dial or a
numeric key, and then press the key.
To retry the setting, press the key.
The display will return to the MR EDIT menu. Point the arrow at END and then
press the key (Alternatively you may press the key, and then press the
key while is shown on the display).
ENT
TF
F
ENT
TF
CLR
SKIP
ENT
TF
F TUNE
ENT
TF
F TUNE
ENT
TF
M
A2 ---- . ----
--------
OVE FROM
M
A2 84 . 5
12 ABC
OVE FROM
M
B3 ---- . ----
--------
OVE TO
M
B3 ---- . ----
5 --------
OVE TO