Instruction manual

Select the program bank in which you want to set a memory channel

for scanning.

Using the dial or UP/DOWN key, point the arrow at the

program you want to set. Press the key.

Select the program number you want to assign to a memory channel.

Using the dial or UP/DOWN key, point the arrow at the

program number you want to select. Press the key.

Select a memory bank.

Select a memory bank and then press the key.

Using the dial or a numeric key, specify a memory bank

number (Pressing the key toggles from bank groups

A through E). Move the arrow back to the position

pointing at the channel by pressing the DOWN key.

Select a memory channel.

Using the dial or a numeric key, specify a memory

channel number. Press the key (To cancel the

setting, press the key).

Repeat the above steps 2 through 5 to register all the channels on which you are

scanning, and then press the key.

The display will return to the PMR BANK screen. Point the arrow at END and

then press the key (Alternatively you may press the key, and then

key while is shown on the display).

ENT

CLR

SKIP

ENT

F TUNE

ENT

BANK

BANK1

-----

PG 1

-----

RBANK

----

--------

A2 84 . 5

12 ABC