Instruction manual

69
3.4 MR mode functions
This section explains operations of the MR mode.
3.4.1 Memorizing frequencies
This function saves selected frequencies of memory channels.
1 Set the frequency you want to memorize, in the VFO mode.
Press the key to get the VFO mode. Then, set the frequency on the top line
(currently used) band.
2 Select the bank number to which you want to assign a frequency.
Press the key, and then press
the key while is shown
on the display.
The SET MR screen will appear.
Select the bank number using the dial or a numeric key,
and then press the DOWN key (Pressing the key
toggles from the bank groups A through E).
3 Select a memory channel.
Using the dial or a numeric key, select the channel
number to which you want to assign the frequency. Press
the key.
4 Give a name to the memory channel.
Select each character by turning the dial, and then
establish it by pressing the DOWN key. The established
character can be canceled by pressing the UP key. Up
to 8 characters may be entered for the name.
5 Store the memory channel.
After you have finished entering the name, press the key. The frequency
will be assigned to the selected memory channel, and then the display will return
to the VFO mode.
Note: • The settings for the radio, frequency step, attenuator, and CTCSS
decoding function, which were completed in the VFO mode, will be stored
on the memory channel.
• In naming the memory channel, you can move 11 characters ahead by
turning the dial while holding down the key.
F
ENT
TF
ENT
TF
F TUNE
MRMW
F
O
D
E
NAME
S
T
E
P
A
T
T
S
E
T
P
O
W
E
R
R
X
/
S
T
P
M
S
V
F
O
M
R
M
W
A
B
SET

HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
A=B
VFO
S
A
---- . ----
1 --------
ET MR
S
A2
---- . ----
12 --------
ET MR
S
ABCDEFGH I JK
ABC
et M RNA M E