Instruction manual
64
3.3 PMS mode functions
This section explains operations in the PMS mode.
3.3.1 Programmed scan operations
This section is for programmed scan operations.
Starting the scanning frequency apply for low frequency, and ending the
scanning frequency apply for high frequency in the VFO.
A modulation mode and a frequency step apply for the active VFO (indicated in
uppercase A or B) settings.
1
Call up the PMS SET screen.
Press the key, and then press
the key while is shown
on the display.
The MENU will appear. Point the
arrow at +PMS using the dial or UP/DOWN key, and
then press the key.
The PMS screen will appear. Point the arrow at +PMS
SET and then press the key.
The PMS SET screen will appear.
2
Select the bank on which you want to store the scanning program.
Using the dial or numeric keys, select the bank on which
you want to store the scanning program. Press the
key (Pressing the key toggles between the
uppercase P and the lowercase p).
3
Specify the frequency to start the scanning.
Using numeric keys, enter the frequency at which you
want to start the scanning. Press the key.
4
Specify the frequency to end the scanning.
Using numeric keys, enter the frequency at which you
want to end the scanning. Press the key.
ENT
TF
ENT
TF
F TUNE
ENT
TF
ENT
TF
ENT
TF
HELP
SET
F
M
O
D
E
AUTO MW
MIC
A-B S
M NAME
S
T
E
P
A
T
T
S
E
T
P
O
W
E
R
P
M
S
V
F
O
M
R
M
W
A
B
SET
K
L
3
6
2
1
RF C
HELP
MONI
F
SRCH
LAMP
SQL VOL
DOWN UP
S
P
----
.
----
--------
etPMS BANK
S
p
1
----
.
----
--------
etPMS BANK
S
p1 82.
--------
etPMS START
S
p1 145. 34
etP
M
SEND