Instruction manual
31
4
Select a channel.
Using the dial or UP/DOWN key, select a channel between 00 and 39. The
assigned frequency will appear on the upper line of the display and its name on
the lower line.
2.15 Using HELP menu
The HELP menu is used to display information on whatever function or operation
you want to know. You can go to different setup screens from the HELP items
and then set the parameters.
1
Display the HELP menu.
Press the key. The HELP
menu will appear.
2
Select the function on which you want to view an explanation.
Point the arrow at the desired item using the dial or
UP/DOWN key, and then press the key. The
submenu for that item will appear.
Some items marked with a plus sign (+) have a submenu
below them. Similarly point the arrow at the desired item, and then press the
key. Pressing the key puts you back to the upper layer.
3
Select a HELP item.
Point the arrow at Inst. and then press the key. The
selected function will be explained.
Point the arrow at Set! and then press the key. You
will go to the setup screen for that function.
If you point the arrow at any item followed by “!” and then press the key,
the selected function will be executed.
4
Exit the HELP mode.
Hold down the key until you go back to the previous screen.
Note: • The HELP information can be displayed in English. For further details, see
“3.1.7 Selecting a language mode” (page 37).
• Selecting the Set! item exits the HELP mode. To view the HELP information
again, press the key after establishing Set! or canceling it by
pressing the key.
• A long explanation shown on the display can be scrolled up and down by
pressing the UP/DOWN key.
ENT
TF
CLR
SKIP
ENT
TF
ENT
TF
ENT
TF
ENT
TF
HELP
SET
M
O
D
E
AUTO MW
MIC
SCRT
PRIO
CTCSS
NE
A-B S
M NAME
TF
S
T
E
P
A
T
T
S
E
T
V
F
O
M
R
M
W
A
B
K
L
3
6
9
5
2
1
4
T
SCN
RF C
HELP
SRCH
LAMP
DOWN UP
CLR
SKIP
HELP
KEY
HELP
SET
P
OW
ER
KEY
Inst
.
Se t
T
I
MER
CLR
SKIP
ENT
TF