Instruction manual

Professional

FM Transceiver

BASIC OPERATIONS

Receiving

Resetting

NOTE: Please be aware of the squelch level and selective-calling settings such as CTCSS and DCS as

you may risk not hearing the receiving signal.

Transmitting

Select the channel that you wish to operate.

When a signal is received on the channel that you selected, and S-meter is displayed on the LCD,

then the received signal can be heard. The RX indicator also lights green at this time.

1. Select the channel by using the keypad.

2. Press the

【

PTT

】

key. The red TX indicator turns on while transmitting.

3. While holding down the

【

PTT

】

key, speak into the unit at normal voice from the distance of 5cm (2").

4. Release the

【

PTT

】

key to receive.

Before transmitting, it is recommended to monitor the channel you are going to use to ensure it is not

busy by pressing and holding

【

PF2

】

key.

When you reset the unit, all settings are returned to the initial factory settings. The reset deletes the

programmed memory channels also.

1. Turn on the unit with the

【

PF1

】

and

【

】

keys pressed together.