Instruction manual

8
2. Control Functions
No. Name During transmission
1
PTT -
Pressed for a while
Enables transmission
while holding.
2
MONI Transmits tone call signal (page 25).-
3
FUNC/SET -Activates the Setting
mode (page 17).
4
▲/T SQ
Starts upward scanning
(page 22).
5
▼/CALL Starts downward
scanning (page 22).
6 V/M /MW
-
-
Sets the transmission output level HIGH
(page 16).
Sets the transmission output level LOW
(page 16).