05-Jun-2007 XE972 User Manual Confidential Alinco XE972 User Manual Rev. 0.
05-Jun-2007 List of Contents 1. 1.1 1.2 1.3 1.4 1.5 1.6 General Overview Features Application Interface connecter pin assignment Outline View Package Dimensions 2. Characteristics 2.1 Electrical Characteristics 2.2 RF Characteristics 3. Notes Alinco XE972 User Manual Rev. 0.
05-Jun-2007 1. General 1.1 Overview This specification covers XE972 Data Radio Unit, which complies with ARIB STD T-66, FCC Part 15 247 RSS-210 and ETSI EN 300 400. This unit consist of Texas CC2500 radio IC and Renesas CPU R8C19 for Radio Data communication in 2.4GHz band. All detailed specification may be changed notice. without 2.4GHz Antenna CC2500 TEXAS RADIO IC R8C19 RENESAS CPU UART Interface Alinco XE972 User Manual Rev. 0.
05-Jun-2007 1.2 Features • • • • • • • Radio Data rate up to 32kbps. Support Slow Hopping 22channels in 2.401GHz ~ 2.4115GHz Ultra Low Power Consumption RoHS Compliant Support USART connection speed up to 115.2kbps Small Package Size (38.8 x 23.8 x 6.5) Integrated 26MHz TCXO 1.3 Application • • • • Radio Data Modem Wireless Controller Wireless Data Logger Wireless Security Sensor 1.4 Interface connecter pin assignment Back Side View of XE972 1 1. +B 5 (Power In) 10 13 2.
05-Jun-2007 1.5 Outline View Antenna Connector Interface Connector 1.6 Package Dimensions 6.5 5 1 23.8 10 13 38.8 Top View Left Side View Right Side View Side View Weight 8 g Alinco XE972 User Manual Rev. 0.
05-Jun-2007 4. Characteristics 4.1 Electrical Characteristics Absolute Maximum Rating Rating Minimum Typical Maximum Unit Supply Voltage 3.1 3.5 6.5 V Operating Temperature Range -20 25 55 C RX Current consumption 50 mA TX Current consumption 80 mA 4.
05-Jun-2007 3. Notes FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
05-Jun-2007 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
05-Jun-2007 IC Statements: The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. This device complies with RSS 210 of Industry Canada “IC”. “Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
