User's Manual

27
MENU 51: VHF EXTERNAL SPEAKER PORT
When the function setup as external (EXT), an external Dual Track speaker
must be connected in order to hear the calling on VHF. The calling from
VHF and UHF are separated in 2 tracks.
Press and hold FUNC key until activating the function menu.Rotate the
1.
dial or use
[UP/DOWN]
keys to select the
menu 51 VSPCONT and press the dial.
Rotate the dial or use
2.
[UP/DOWN]
keys to
select the value:
INT: Internal speaker, VHF and UHF band
share one speaker
EXT: External speaker, the calling on VHF
is only audible through the external
Dual Track speaker.
Press
3.
[PTT]
to set and exit or press the dial to set and continue.
6
Parameter Setting Mode (SET MODE)
MENU 53: TALK AROUND
MENU 52: BEEP VOLUME CONTROL
Press and hold func key until activating the function menu.Rotate the
1.
dial or use
[UP/DOWN]
keys to select the
menu 52 BP-VOL and press the dial.
Rotate the dial or use
2.
[UP/DOWN]
keys to
select the value:
LOW: BEEP volume is low.
HIGH: BEEP volume is high.
Press
3.
[PTT]
to set and exit or press the dial to set and continue.
With this function on, the transceiver will not able to communicate with
another transceiver through a repeater.
Press and hold func key until activating
1.
the function menu.Rotate the dial or use
MENU 54: MICROPHONE SPEAKER
Press and hold func key until activating
1.
the function menu.Rotate the dial or use
[UP/DOWN] keys to select the menu 54
HND SPK. and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the value:
HSPKOFF: Turn off microphone speaker.
HSPK ON: Turn on microphone speaker.
MSPKOFF: Turn off Main speaker.
Press
3.
[PTT]
to set and exit or press the dial
to set and continue.
Press and hold func key until activating the function menu.Rotate the
1.
dial or use
[UP/DOWN]
keys to select the menu 55 BAK -- and press
the dial.
The memory bank is shown on the display.
2.
Press
3.
[PTT]
to set and exit or press the
dial to set and continue.
MENU 55: MEMORY BANKS ENQUIRY
[UP/DOWN] keys to select the menu 53 TALK and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the value:
ON: Turn on Talk Around
OFF: Turn off Talk Around
Press [
3.
PTT] to set and exit or press the dial to set and continue.