User's Manual

42: NARROW FM MODE
25
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 41 VFOTR and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the value:
ON: Turn on the Link. In VFO mode, both
MAIN and SUB band frequencies
changes by the same channel steps at
dial or [UP/DOWN] operation.
OFF: Turn off the Link.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
MENU 41: VFO FREQUENCY LINKAGE
This function is valid only when both bands operate in VFO mode.
N
OTE
6
Parameter Setting Mode (SET MODE)
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 42 WINNAR and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the mode:
NARROW: Narrow bandwidth (12.5KHz)
Press [
3.
PTT] to set and exit or press the
dial to set and continue.
Press and hold
1.
key until activating the function menu.Rotate
the dial or use [UP/DOWN] keys to select
the menu 43 X-RPT.
Press the dial to display "
2.
XSTART".
Press the dial again, a beep sounds and
3.
displays REP.
Rotate the dial or use [UP/DOWN] keys to
4.
select the value.
Press [
5.
PTT] to set and exit or press the dial to set and continue.
MENU
MENU 43: CROSSBAND REPEAT (HE MODEL NOT AVAILABLE)
The FM bandwidth must be set correctly in accordance with your local
regulations. Incorrect setting may also cause poor audio quality.
N
OTE
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 40 5TONE ID and press the dial.
The 5-TONE self ID is shown on the
2.
display.
Press [
3.
PTT] to set and exit or press the
dial to set and continue.
MENU 40: 5-TONE SELF ID ENQUIRY
press the dial.
The DTMF self ID is shown on the display.
2.
Press [
3.
PTT] to set and exit or press the
dial to set and continue.