User's Manual

24
Press and hold
1.
key until activating
the function menu. Rotate the dial or use
Press and hold
1.
key until activating
the function menu.Rotate the dial or use
[UP/DOWN] keys to select the menu 38
REPLOCK and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to select the mode:
RLORP: Signaling BCLO, transmitting
is inhibited when a signal with different
CTCSS/DCS setting is being received.
RLOBU: Transmitting is inhibited when a
signal of any kind is being received.
OFF: BCLO is disabled.Transmitting is
allowed in any receiving status.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
The difference between the transmitting and receiving frequencies for
repeater operation is called shift or offset frequnecy.
Press and hold
1.
key until activating
the function menu.Rotate the dial or use
[UP/DOWN] keys to select the menu 36
SHIFT and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys
to select desired value between 0 and
100MHz.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
MENU 37: DISPLAY MODE
MENU 38: BUSY CHANNEL LOCKOUT(BCLO)
MENU 36: OFFSET FREQUENCY
6
Parameter Setting Mode (SET MODE)
Press and hold
1.
key until activating the function menu.Rotate
the dial or use [UP/DOWN] keys to select the menu 39 DTMF ID and
MENU 39: DTMF SELF ID ENQUIRY
[UP/DOWN] keys to select the menu 37 DISPLAY and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to select the mode:
FREQ: Displays channel number +
frequency in memory mode and switches
to VFO mode by pressing key.
CH: Displays only memory channel
numbers.
NAME: Displays channel number + name
tags in memory mode and switches to
VFO mode by pressing
key.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
Priority channels must be pre-programmed in P SCAN to set this
parameter.
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 35 SCAN M and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys
to select the value:
MEN: Scans all memory channels in the
channel scanning mode.
MSN: Sca ns onl y P rio rit y m emo ry
channels in the channel scanning mode.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
MENU 35: PRIORITY CHANNEL SCAN