User's Manual

23
The squelch opens only when the signal strength reaches to the selected
S-meter reading.
Press and hold
1.
key until activating
the function menu.Rotate the dial or use
[UP/DOWN] keys to select the menu 32 RF SQL and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to select the value:
S-3: Squelch opens at 3 bar.
S-5: Squelch opens at 5 bars.
S-9: Squelch opens at 9 bars.
S-FULL: Squelch opens at FULL-scale
reading only.
Press [
3.
PTT] to set and exit or press the dial to set and continue.
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 33 RPT MOD and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys
to select the value:
Press and hold
1.
key until activating
the function menu.Rotate the dial or use
[UP/DOWN] keys to select the menu 34
SCAN and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys
to select the value:
TIME: Pauses 5 seconds to receive the
signal and resume scanning.
BUSY: Remains on the frequency until
the signal is gone, then resume scanning
after pausing 2 seconds.
SECEDE: Cancels scanning when a
signal is received and stopped scanning.
Press [
3.
PTT] to set and exit or press the
dial to set and continue.
MENU 32: RF SQUELCH
MENU 33: OFFSET DIRECTION
MENU 34: SCAN RESUME CONDITION
6
Parameter Setting Mode (SET MODE)
For Menu details, please refer to Page 29-30, Microphone Operation.
when open, SQL ring adjustment is inefficiency.
N
OTE
NOTE
Rotate the dial or use
2.
[UP/DOWN] keys to select wanted value
Press
3.
[PTT] to set and exit or press the dial to set and continue.
-: Minus offset, means transmitting
frequency is lower than receiving
frequency.
+: Pl us offs et , mea ns trans mit ti ng
frequency is higher than receiving
frequency.
OFF: OFFSET is turn off. Transmitting
frequency i s the same as recei vin g
frequency.
Press [
3.
PTT] to set and exit or press the
dial to set and continue.