User's Manual

19
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 12 DSPSUB and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the value from:
FREQ: Displays sub band frequency.
DC-IN: Displays approximate DC voltage
instead of sub band frequency.
OFF: Turns off to display the sub band
frequnecy.
Press [PTT] to set and exit or press the
3.
dial to set and continue.
While OFF is selected, you can still switch beteen the MAIN and
4.
SUB bands.
This setting only hides the SUB band appearance, not turning off the
5.
SUB band functions.
MENU 12: SUB BAND DISPLAY
Press and hold
1.
key until activating the function menu. Rotate
the dial or use [UP/DOWN] keys to select the menu 14 DTMF S and
press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the time for transmit a single DTMF
encoding tone and the interval time value
from 30Ms / 50Ms / 80Ms / 100Ms / 150Ms
/ 200Ms and 250Ms.
Press [PTT] to set and exit or press the dial to set and continue.
3.
Press and hold
1.
key until activating the function menu.Rotate the
dial or use [UP/DOWN] keys to select the
menu 15 DTMF W and press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the DTMF group.
Press
3.
key again to go back to DTMF.
Pressing [PTT] will transmit with selected
DTMF code (01-16: 16 groups of DTMF
codes programmable). When the selected
group is empty, the LCD displays [------].
Press the dial so that the last bar starts
flashing. Turn the dial to select desired
rst character or number for DTMF tone coding.Press the dial again
to select the next. Press the key to complete and return to the
DTMF group menu. Repeat for more coding.
Press
4.
key again to store values and exit code editing.
Press [PTT] to set and exit or press the dial to set and continue.
5.
MENU 14: DTMF ENCODE TRANSMITTING TIME
MENU 15: DTMF ENCODE SETUP
6
Parameter Setting Mode (SET MODE)
Press and hold
1.
key until activating the function menu.Rotate
the dial or use [UP/DOWN] keys to select the menu 13 DTMF D and
press the dial.
Rotate the dial or use
2.
[UP/DOWN] keys to
select the pre-Loading time value from:
1 0 0 M s / 3 0 0 M s / 6 0 0 M s / 8 0 0 M s a n d
1000Ms(1 second)
Press [PTT] to set and exit or press the dial to set and continue.
3.
MENU 13: DTMF ENCODE PRE-LOADING TIMING