User's Manual

15
CHANNEL COPY
In memory mode, select the desired channel by using the dial or
1.
numerical keys.
Press
2.
key to display and a memory channel number on the
display.
Rotate the dial or press
3.
[UP/DOWN] keys to select a desired
memory channel number.
While displaying the
4.
and a number,
press key. MEN-IN appears on the
display. Two beep is heard and then MEN-IN dissapears. channel
copy completed. If icon disappears during operation, simply press
the
key again to resume.
1.In memory mode, select the desired channel by using the dial or
1.
numerical keys.
Press
2.
key to display then press key. MENOUT appears
on the display. A beep is heard and the memory channel frequency
disappears
Then rotate the dial or press
3.
[UP/
DOWN] keys to confirm, channel delete
completed. If
icon dissapears during
operation, simply press the key
again to resume.
The transceiver has 6 groups “A-F” and one no edit group.
Normal memory: 1 to 200 (200ch)
Bank A: CH 201 to 300 (100ch)
Bank B: CH 301 to 400 (100ch)
Bank C: CH 401 to 500 (100ch)
Bank D: CH 501 to 600 (100ch)
Bank E: CH 601 to 700(100ch)
Bank F: CH 701 to 758 (58ch)
In memory mode, you can do the groups function according to the
following instruction, the groups number show in the position of channel
number. Normal memory: show “- -”.
Press
1.
key to display then press key to enter the group
mode.
Rotating the dial to choose the groups you want.
2.
Press the
3.
key again to conrm, " "
icon appears on the display, then the radio
goes to the group that you choose.
CHANNEL DELETE
MEMORY BANKS OPERATION
Basic Operations
5
If there is not channel in your choose group, it will return to the
original channel.
Exit the groups mode: Press the
4.
then press key in two
times continuously, "
" icon disappears, the radio will back to the
channel mode.
Set a pair of upper and lower limit frequencies in each L1/U1- L5/
U5 memory channels to activate the function. L stands for the lower
and U stands for the upper limit. The upper
limit must exceed the lower limit frequency.
Please refer above "MEMORY CHANNEL
PROGRAMMING" section for how to memory frequencies.