User's Manual

10
4
Getting Acquainted
NO. KEY FUNCTION
1
M/S
Switches between Main and Sub bands.
2
Number Key
Input VFO frequency or DTMF dial out etc.
microphone
9
8
10
1
17
Appears while Channels setting in scrambling function.
18
no function at present.
19
Appears channel frequency or channel name.
20
Appears channel number or grouping number.
21
MAIN
Appears while Main band.
22
P1
Appears when current channel is priority channel.
23
P2
Appears while channel setting in Scan skip.
24
P3
Flash while open Scan.
25
Appears while main/sub receive squelch opened.
26
MAIN:Transmit power indicator/receive indicator.
27
SUB:Transmit power indicator/receive indicator.
3
PA Switches between VFO and Memory modes.
PB Changes CTCSS and DCS mode parameters.
PC Starts and stops scanning.
PD Transmit preprogrammed DTMF, 2TONE, 5TONE code.
4
Band Indicator The indicator light on for Main band.
5
TX/RX Indicator
(Main/Sub)
Illuminates red while transmitting, green while receiving
signals.
6
PTT
Push-TO-Talk key: Press this key to transmit.
7
UP
Increase frequency ,channel number or setting value.
8
DOWN
Decrease frequency, channel number or setting value.
9
MIC Speak here during transmission.
10
Speaker
When shut the speaker in the base, you can hear the
calling by this speaker.
MIC Connector Diagram(in the front view of connector)