User's Manual

9
4
Getting Acquainted
1 MW FUNC+
V/M
Programs the data into the memory.
2 DEL FUNC+
CALL
Delete settings.
3 SHIFT FUNC+
MHZ
Changes shift directions.
4
LOCK
FUNC+
TS/DOS
Blocks the keys and dial operation
5 PRI FUNC+
H/L
Enters to the Priority monitor.
6 SKIP FUNC+
SCAN
Sets scan skip channels
7 FUNC+
MONI
Setting memory banks.
NO. KEY FUNCTION
1
Ext. Power
Jack
To Connect optional cable for ignition key On/Off
function.
2
Ext.Speaker
Terminal
To Connect an optional external speaker.
3
Antenna
Connector
Connect a 50 Ω antenna
4
Ext.Single
Speaker Port
Terminal for optional single external speaker.
5 Fan Runs Automatically when radio temperature rise up.
NO. KEY
Å
FUNCTION
1
Appears when press FUNC key.
2
Appears while in AM mode.
3
Appears while using Middle output power.
4
Appears while using low output power.
5
Appears while channel setting in narrow band.
6
Appears while channel setting in offset direction.
7
Appears while channel setting in CTCSS encoding and decoding
8
DCS
Appears while channel setting in DCS encoding and decoding.
9
COMP
Appears while channels setting in voice companding.
10
Appears while open key lock function.
11
REP
Appears while open Cross repeat.
12
no function at present.
13
SUB
Appears while SUB band in Main side.
14
Appears while Channels setting in Scrambler.
15
Appears while open grouping function.
16
Appears while Sub side in memory channel or Call channel mode.
DISPLAY
Rear panel
21
3
4 5
1 2 3 4 5 6 7 8 13 9 14 10 15 11 1712
16
18
19
20
21
25
26
22 23 24 25
27
Functions
which can be activated while appears, after pressing the
Key