User's Manual

Switches the output power
8
4
NO. KEY FUNCTION
1 PWR(Power) Press it to power On/Off the transceiver.
2
Main AF knob
Sub AF knob
Adjust Main band audio level.
Adjust Sub band audio level.
3
Main SQL ring
Sub SQL ring
Adjust Main band squelch level.
Adjust Sub band squelch level.
4 Dial Knob
Rotate it to choose frequency/channel. Press
it to set the left band as "Main Band". In function
setup, it works as confirm key. in scan mode,
rotate it to change scan directions.
5 FUNC/SET
Short press:
Function Key
Long press:
Enter Function Menu setting
6 [V/M]
Short press:
Switches between VFO mode and
memory mode.
Long press:
Switch VFO working frequency
Getting Acquainted
Front panel
Basic Functions
7 [CALL]
Short press:
Switches to CALL channel.
Long press:
when channel setting DTMF/5
Tone, press this key can edit ANI code calling
(microphone input)
8 [MHz]
Short press:
Changes frequency step by 1MHz in
VFO mode.
Long press:
Open the scrambling function.
9 [TS/DCS]
Short press:
Sets CTCSS and DCS values.
Long press:
when channel setting CTCSS/
DCS, long press this key to open CTCSS/DCS
frequency scan.
10 [H/L]
Short press:
Long press:
Open the emergency alarm function
11
LED indicators
(Right/Left)
I lluminates red while transmitting, green while
receiving signals.
12 [SCAN]
Short press:
Starts scanning.
Long press:
DTMF/2TONE/5TONE setting
13 [MONI]
O pen s s que l c h a n d ca n c e ls T SQ/ D C S
temporary.
14
MIC
Connector
connect the mic connector or data reading/writing，
cloning
15 LCD Display
Displays frequencies, channels and other
operating parameters.