User's Manual

17
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/ key to choose No.06
menu, LCD displays "SPK--SQ".
Turn Main Dial to select the desired
3.
combination.
If select "SQ",it indicates you can hear the calling from caller when
receive a matching carrier.
If LCD displays "

CTC",it indicates
you can hear the calling from caller
when receive a matching carrier and
CTCSS/DCS signaling .
If LCD displays "

TON",it indicates
you can hear the calling from caller
when receive a matching carrier and
DTMF/2TONE/5TONE signaling .
7
Sending 5-Tone Call
Turn Main Dial to select the desired 5-TONE group, Press [
3.
PTT] to
transmit selected group.
Total:100groups,00-99,Default:00.
4.
Press
5.
key to conrm and exit.
5-TONE operation parameters must be edited by programming
software prior to the practical operation.
Sending 2-Tone Call
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/ k e y t o c h o o s e
No.03 menu, LCD displays "2TON
xx","XX"indicates the preprogrammed
groups.
Turn Main Dial to select the desired 2-TONE group, Press PTT to
3.
transmit selected group.
Total:32groups,00-31, Default: 00.
4.
Press
5.
key to conrm and exit.
2-TONE will be operation parameters must be edited by
programming software prior to the practical operation.
This function is to only query edited group or name.
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/ key to choose No.04 menu,
LCD displays "5TON xx","XX"indicates the
preprogrammed groups.
Sending DTMF call
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.05
menu, LCD displays "DTMF xx", "XX"
indicates the operation parameters must
be.
Turn Main Dial to select the desired DTMF group,Press PTT to
3.
transmit selected group.
Total:16groups,00-16,Default:00.
4.
Press
5.
key to conrm and exit.
Signaling Combination setup
This function is to improve the level of protecting the radio against
receiving irrelative signal.
PARAMETER SETTING MODE