User's Manual

7
4
NO.  FUNCTION
1
PWR(Power) Power on/Off
2
VOL Adjust Volume Key
3
SQL Knob Adjust Squelch level
4
Main Dial
Change frequency, memory channel and scan
direction etc.
5
FUNC/SET Function Key
6
V/M/MW
Switches between VFO mode and Channel
mode
7
MHz/SHIFT Step Size Key ( step:1MHz)
8
TS/DCS/LOCK Sets CTCSS and DCS value
9
CALL/H/L Call key
10
MONI Squelch off
11
Data Terminal
Data reading/writing, cloning and theft alarm
functions
12
TX lights during Transmitting
NO.  FUNCTION
4
FUNC/SET Conrms the selective functions and exit
5
V/M/MW Stores data into channels
6
MHz/SHIFT Sets offset direction and offset frequency
7
TS/DCS/LOCK Sets Keypad lock function
8
CALL /H/L
Switches between HI, MID and LOW power
transmission
9
MONI Compander mode on/off
NO.  FUNCTION
1
PWR Reset to factory default settings
5
V/M/MW Erase the memory
6
MHz/SHIFT Switches between Wide/ Narrow band
7
TS/DCS/LOCK Auto dialer
8
CALL
Enters clone data function mode
9
MONI Enters power supply voltage indication mode
NO.  FUNCTION
4
FUNC/SET
Press and hold for 2s to enter the Setting
mode
9
MONI Monitor mode
Getting Acquainted
Front panel
Press key until 
key.
Press
      


to be activated
Basic Functions
13
Mic.connector
Microphone connection port